---
title: "WV-U11300-V2 series"
canonical: "https://iproreleasenote.refined.site/space/RN/1107461382/WV-U11300-V2%20series"
format: markdown
---
# Released versions:

- [Version 2.70](#V2.70)
- [Version 2.62](#V2.62)
- [Version 2.61](#V2.61)
- [Version 2.60](#V2.60)
- [Version 2.50](#V2.50)
- [Version 2.40](#V2.40)
- [Version 2.35](#V2.35)
- [Version 2.34](#V2.34)

### This release note applies to the following models:

|  |
| --- |
| **Version 2.34 or later** |
| WV-U11300-V2 | WV-U21300-V2L |  |  |

# Priority Rank Level

|  |
| --- |
| 🇦  : Recommended to apply  
🇧  : When issue happened  
🇨  : Maintenance timing  
🇺 : Function / performance improvement |

> Macro (anchor)

  

# Version 2.70

Release date: October 22, 2024 

### Resolved Issues

Fixed the following issue including other minor issue:

- Corrected an issue where the frame rate might drop. 🇨     
Occurrence condition:   
- [Stream encoding format] is H.264  
- [Frame rate] is set to 5fps  
> Macro (anchor)

# Version 2.62

Release date: July 10, 2024

### Resolved Issues

- Corrected an issue where the live image might not appear on the [VMD area] and [Image quality] setting windows. 🇨   
Occurrence conditions: Version 2.50, 2.60 and 2.61  
> Macro (anchor)

# Version 2.61

Release date: June 25, 2024

### Resolved Issues

- Corrected an issue where the camera might transmit a lower frame rate image than setting. 🇨   
Occurrence conditions:   
- [Frame rate] is set to 5fps or 3fps  
- [Stream encoding format] is H.264  
- [Image capture size] is 640x360, 320x180, VGA or QVGA  
> Macro (anchor)

# Version 2.60

Release date: May 31 2024 

### New Features / Improvements

- Changed the font on the browser as below:
  - The font of on-screen display (OSD) to Iwata UD 🇺

### Resolved Issues

- Corrected an issue where some 3rd party applications might not work with version 2.50. 🇨
- Corrected an issue where the camera might reboot when [Maximum shutter] is set to "Max.4/30s" on rare occasion. 🇨  
> Macro (anchor)

# Version 2.50

Release date: Feb. 29 2024 

### New Features / Improvements

- Added an improvement to enhance security. 🇺
- Added improvements to the live and setting windows on the web browser. 🇺
- Improved the response to CGI command. 🇺

### Resolved Issues

- Fixed minor issues, including the following. 🇨  
- Corrected an issue where a firmware update could occasionally fail.
  > Macro (anchor)

# Version 2.40

Release date: Sept 28, 2023

### New Features / Improvements

- Improved the performance while updating or installing extension software to avoid failure in a slow network. 🇺
- Enabled [Guest User] by default on the [User auth.] tab in [User mng.] 🇺
- Improved the response to the following CGI commands. 🇺
  - /cgi-bin/getdata
  - /cgi-bin/get_capability
- Improved the ONVIF connection. 🇺
- Improved the performance while downloading a video data from an SD memory card in an unstable network. 🇺

### Resolved Issues

- Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion. 🇨   
Occurrence conditions: Start sequence display on the recorder while performing SD memory card recording on the camera.
- Corrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting. 🇨  
> Macro (anchor)

# Version 2.35

Release date: July 28, 2023 

### New Features / Improvements

- Improved the productivity at production line. 🇺  
> Macro (anchor)

# Version 2.34

Release date: June 28 2023 

- First mass production