--- title: "WV-S71300-F3" canonical: "https://iproreleasenote.refined.site/space/RN/905053093/WV-S71300-F3" format: markdown --- # Released versions: - [Version 2.70](#V2.70) - [Version 2.60](#V2.60) - [Version 2.50](#V2.50) - [Version 2.49](#V2.49) - [Version 2.40](#V2.40) - [Version 2.36](#V2.36) - [Version 2.33](#V2.33) - [Version 2.30](#V2.30) - [Version 2.23](#V2.23) - [Version 2.20](#V2.20) - [Version 1.10 (First production)](#V1.10) ### This release note applies to the following models: | | | --- | | **Version 1.10 or later** | | WV-S71300-F3 | | | | | **Version 2.36 or later** | | WV-S71300A-F3 | | | | # Priority Rank Level | | | --- | | πŸ‡¦ : Recommended to apply πŸ‡§ : When issue happened πŸ‡¨ : Maintenance timing πŸ‡Ί : Function / performance improvement | > Macro (anchor) # Version 2.70 Release date: October 22, 2024 ### New Features / Improvements - Changed the icons and font for design improvement. πŸ‡Ί - Support camera direct connect to Remote Monitoring without recorders. πŸ‡Ί - Improved ONVIF connection. πŸ‡Ί - Support NTPv3. πŸ‡Ί ### Resolved Issues Fixed the following issue including other minor issues: - Corrected the SNMP MIB response. πŸ‡¨ > Macro (anchor) # Version 2.60 Release date: May 31 2024 ### New Features / Improvements - Changed the font and color on the browser as below: - The font of on-screen display (OSD) to Iwata UD πŸ‡Ί - The font of the live and setting windows to NotoSans πŸ‡Ί - The color of i-PPO logo on the live window to black πŸ‡Ί - Removed the need for KMS registration of AI Face Detection. πŸ‡Ί [View detail](https://versionup.refined.site/space/CVI/858263032/Network+Cameras#1.-Change-KMS-registration-to-unnecessary-for-AI-Face-Detection) From this version, issuing and registering the Registration Key are no longer required for AI Face Detection. - Added improvements for 3rd party application development. πŸ‡Ί See details at [Development Partner Portal](https://dev-partner-en.i-pro.com/space/TPFAQEN/1164345345/i-PRO+camera+firmware+version+up+contents). - Improved [Control log] to record "AI processor occupancy (Ext. software)" logs properly. πŸ‡Ί - Improved ONVIF communication. πŸ‡Ί ### Resolved Issues Fixed the following issues including other minor issues: - Corrected an issue where the setting menu and schedule of pre-installed extension software might not appear with version 2.50. πŸ‡¨ - Corrected an issue where some 3rd party applications might not work with version 2.50. πŸ‡¨ - Corrected an issue where AI-VMD detection frames did not appear on Genetec Security Desk with version 2.50. πŸ‡¨ - Corrected an issue where SMTP setting might be initialized after the camera was rebooted. πŸ‡¨ - Corrected the response to the following CGI command. πŸ‡¨ - cgi-bin/getdata - Added a correction to a message in French. πŸ‡¨ > Macro (anchor) # Version 2.50 Release date: Feb. 29 2024 [Update on Apr. 24] To use Vaxtor VaxALPR with this firmware version, update VaxALPR to V1.3.21 or later. ### New Features / Improvements - Added improvements to enhance security. πŸ‡Ί e.g., - Supports signed firmware - [Subject Alternative Name] field has been added to [CA Certificate - Generate Certificate Signing Request] in HTTPS setting. [View detail](https://versionup.refined.site/space/CVI/858263032/Network+Cameras#1.-Support-multiple-domains-in-Subject-Alternative-Name) - [Security] tab has been added to the [User mng.] setting. [View detail](https://versionup.refined.site/space/CVI/858263032/Network+Cameras#2.-Improve-measures-against-brute-force-attacks) - Added improvements to the live and setting windows on the web browser. πŸ‡Ί e.g., - A button to show and hide frame rate and bit rate has been added on the live image. [View detail](https://versionup.refined.site/space/CVI/858263032/Network+Cameras#5.-Supports-real-time-frame-rate/-bit-rate-display) - HTTP alarm notification setting has been improved. [View detail](https://versionup.refined.site/space/CVI/858263032/Network+Cameras#4.-Add-SD-card-error-event-to-HTTP-alarm) - Improved the response to CGI commands. πŸ‡Ί Refer to Command Document (H.265 supported models) at [Device integration - IP Camera / i-PRO page](https://i-pro.com/products_and_solutions/en/surveillance/learning-and-support/device-integration/i-pro-camera). - Improved the image quality. πŸ‡Ί For verification results and restrictions on each browser, refer to "Verification of camera performance with Google Chrome, Firefox, and Microsoft Edge (C0132)" on [Technical Information](https://i-pro.com/products_and_solutions/en/surveillance/learning-and-support/knowledge-base/technical-information). - Improved the connectivity to Video Management Software (VMS). πŸ‡Ί - Improved the settings for the extension software AI Privacy Guard. πŸ‡Ί [View detail](https://versionup.refined.site/space/CVI/858263032/Network+Cameras#8.-Improve-AI-Privacy-Guard-setting) - Improved the ONVIF connection. πŸ‡Ί ### Resolved Issues - Fixed minor issues. πŸ‡¨ > Macro (anchor) # Version 2.49 Release date: Feb. 29 2024 - Intermediate firmware version to upgrade from version 2.4x or earlier to version 2.50 or later. > Macro (anchor) # Version 2.40 Release date: Sept 28, 2023 ->Updated on Oct 31: Added an item written in red SDK version: V1.60 ### New Features / Improvements - Improved the performance while updating or installing extension software to avoid failure in a slow network. πŸ‡Ί - Improved the image quality. πŸ‡Ί - Improved the response to the following CGI commands. πŸ‡Ί - /cgi-bin/getdata - /cgi-bin/get_capability - /cgi-bin/get_value_range - Improved the data management when updating extension software applications. πŸ‡Ί - Improved the SRTP communication. πŸ‡Ί - Improved the ONVIF connection. πŸ‡Ί - Changed the [SNMP] default setting to Off on the [Network] page. πŸ‡Ί - Improved the performance while downloading a video data from an SD memory card in an unstable network. πŸ‡Ί ### Resolved Issues - Corrected an issue where an mp4 video recorded on an SD memory card could not be played back on the camera. πŸ‡¨ Occurrence condition: Record an mp4 video with [GOP control] set to "Advanced(Fixedβ€ˆGOPβ€ˆ60sβ€ˆw/1sβ€ˆkey-frame)" - Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion. πŸ‡¨ Occurrence conditions: Start sequence display on the recorder while performing SD memory card recording on the camera. - Corrected an issue where the [Save trigger] setting of SD memory recording might unexpectedly changed after firmware update. πŸ‡¨ - Corrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting. πŸ‡¨ - Corrected an issue where MQTT notification worked only when [AI analytics target] is set to "Other" for audio detection. πŸ‡¨ - Corrected an issue where multi-screen live view might not show images from other cameras. πŸ‡¨ > Macro (anchor) # Version 2.36 Release date: May 31 2023 SDK version: V1.60 ### Add new models - First mass production for WV-S71300A-F3 ### Resolved Issues - Corrected an issue where a short-term communication error could occur on a connected recorder. πŸ‡¨ Occurrence condition: - FIrmware version from 2.10 to 2.33 - [SD backup rec.] is enabled on the recorder connected to the camera. > Macro (anchor) # Version 2.33 Release date: March 31, 2023 SDK version: V1.60 ### New Features / Improvements - Supports ext4 for SD memory card format. πŸ‡Ί [View details](https://versionup.refined.site/space/CVI/858263032#1.-Add-ext4-support-to-SD-memory-card-file-system-format) [SD Memory Card File System Format] setting has been added to the [SD memory card] page. - Improved the ONVIF connection. πŸ‡Ί ### Resolved Issues - Corrected an issue where the camera might reboot. πŸ‡¨ Occurrence conditions: - The extension software AI-VMD and AI Privacy Guard are installed and enabled on the camera. - The camera is connected to a recorder and β€œSD backup rec.” is enabled on the recorder’s setting. - Corrected an issue where the camera might be slow to start up. πŸ‡¨ Occurrence condition: Multicast auto start is enabled by CGI command. > Macro (anchor) # Version 2.30 Release date: February 27, 2023 SDK version: V1.60 ### New Features / Improvements - Supports new CGI commands. πŸ‡Ί - Supports day and night scene switching on the [Schedule] setting. πŸ‡Ί [View details #1](https://versionup.refined.site/space/CVI/858263032#1.-Improve-schedule-settings-(Day/Night-scene-switching)) "Daytime: Image Quality 1/ Night: Image Quality 2" has been added to the [Schedule mode] options. *[Scene settings linked to sunrise and sunset times] need to be configured to use this function. - Added the On/Off setting to the [SNMP agent setting] in [Network]->[Advanced]->[SNMP]. πŸ‡Ί *Default=On - Supports a CGI command to start SD recording when an image transmission stops. πŸ‡Ί [View details #2](https://versionup.refined.site/space/CVI/858263032#2.-Add-%22Auto-Backup%22-to-%22Save-trigger%22-of-SD-recording) - Supports editing the camera title on the live window. An edit icon appears next to the camera title. πŸ‡Ί Note: Available for administrator only. - Supports a command to send HTTP port number to a 3rd party application. πŸ‡Ί - Changed the default DHCP host name from COM MID1 to i-PRO-. πŸ‡Ί - Improved the FTP/SFTP settings as follows πŸ‡Ί [View details #3](https://versionup.refined.site/space/CVI/858263032#3.-Improve-FTP/SFTP-settings) - Added 2fps and 3fps to the [Transmission interval] options of [Pre alarm] and [Post alarm] - Increased the number of SFTP server setting from 1 to2 - Added "1920x1080" to the [Image capture size] options of [Pre alarm] - Added 0.5s, 1s, 2s, 3s, and 4s to the [Alarm deactivation time] options. πŸ‡Ί [View details #4](https://versionup.refined.site/space/CVI/858263032#4.-Increase-the-range-of-%E2%80%9CAlarm-deactivation-time%E2%80%9D) - Supports replacing %25 with % in the destination address of HTTP alarm notification. πŸ‡Ί - Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode". πŸ‡Ί - Improved [Audio detection] setting so that [AI analytics target] options (Gunshot/ Yell/ Vehicle Horn/ Glass Break) are enabled by default, when [Audio detection] is set to "On". πŸ‡Ί - Improved the frame rate during the slow shutter operation under low illuminance condition. πŸ‡Ί - Improved the image quality as follows πŸ‡Ί Image contrast / Auto focus performance during pan-tilt operation / Image brightness during stabilizer operation - Improved the detection accuracy of people detection for extension software. πŸ‡Ί - Supports the extension software AI Scene Change Detection free of charge. πŸ‡Ί - Changed the text color on the log list for the visibility improvement. πŸ‡Ί - Improved the ONVIF connection. πŸ‡Ί ### Resolved Issues - Corrected an issue where the mic input volume from the camera became higher than the selected value. πŸ‡¨ Occurrence condition: Change the [Mic input volume] on the live window. - Corrected an issue where the [Mic input volume] setting displayed "Line High/ Line Middle/ Line Low" as options on the live window, even for the camera without line input. πŸ‡¨ - Corrected an issue where it was not possible to reinstall an extension software application after uninstalling it. πŸ‡¨ Occurrence condition: The power of camera is turned off while uninstalling the extension software application. - Corrected an issue where the camera could not connect to a recorder and VMS on rare occasion. πŸ‡¨ Occurrence condition: TLS1.3 is selected for [HTTPS-Connection]. - Corrected an issue where H.265/H.264 live image might not appear. πŸ‡¨ Occurrence condition: - Version 2.20 or later - Network Address Port Translation (NAPT) is configured on the router > Macro (anchor) # Version 2.23 Release date: December 13, 2022 SDK version: V1.60 ### Resolved Issues - The angle of view returns to the default center position. πŸ‡§ Occurrence condition: When satisfying both of the following conditions: - Version 2.20 - The camera was restarted after adjusting the angle of view using the Extra optical zoom - SFTP transmission fails depending on the SFTP server to be connected. πŸ‡¨ - The live image may not appear, as the maximum number of users concurrently accessible to the camera decreases. πŸ‡§ Occurrence condition: When satisfying all of the following conditions: - Version 2.20 - [Internet mode] is set to Off by CGI command - H.264/H.265 transmission - Unable to set privacy zone from i-PRO Configuration Tool (iCT). πŸ‡¨ > Macro (anchor) # Version 2.20 Release date: October 3, 2022 SDK version: V1.60 ### New Features / Improvements - Changed the company name in the GlobalSign digital certificate installed on the camera to "i-PRO Co., Ltd." πŸ‡Ί - Supports the FTP function. πŸ‡Ί [View details](https://versionup.refined.site/space/CVI/858263032/Network+Camera#1.-Support-FTP) - Added the HTML initialization function. πŸ‡Ί (Added on Nov.11, 2022) [Load the default HTML files (setup menu).] and [Reset to the default and load the default HTML files.] have been added to the [Default reset] tab. ### Resolved Issues - The occupancy detection area information is not included in the HTTP alarm notification from the camera. πŸ‡¨ - The frame rate and bit rate may not recover once they drop due to the environmental cause. ?? > Macro (anchor) # Version 1.10 Release date: June 1, 2022 - First mass-production