---
title: "System Design Tool"
canonical: "https://iproreleasenote.refined.site/space/RN/981670820/System%20Design%20Tool"
format: markdown
---
# Released versions:

- [Version 4.50](#V4.50)
- [Version 4.41](#V4.41)
- [Version 4.40](#V4.40)
- [Version 4.33](#V4.33)
- [Version 4.32](#V4.32)
- [Version 4.31](#V4.31)
- [Version 4.30](#V4.30)
- [Version 4.20](#V4.20)
- [Version 4.10](#V4.10)
- [Version 4.01](#V4.01)
- [Version 4.00](#V4.00)
- [Version 3.91](#V3.91)
- [Version 3.90](#V3.90)
- [Version 3.80](#V3.80)
- [Version 3.70](#V3.70)
- [Version 3.60](#V3.60)
- [Version 3.50](#V3.50)
- [Version 3.42](#V3.42)
- [Version 3.41](#V3.41)
- [Version 3.40](#V3.40)

  > Macro (anchor)

  

# Version 4.50

Release date: December 19, 2024

### New Features / Improvements

- Support 3D View Simulation. [View detail](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#1.-Support-3D-viewing-angle-simulation)
- Improved the [Side View] so that the height, tilt angle and distance can be adjusted. [View detail](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#2.-Support-changing-camera-installation-information-using-side-view-operations)
- Improved the Report fucntion as follows.   
- Added [Product Information] to the [Contents] tab. [View detail](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#3.-Improve-reporting-function-(Add-Product-information))  
- Optimized the calculation of [FOV Length]
- Support new cameras* in [Recorder Calculation]-[NX series (NX400/NX300/NX200/NX100)].  
*The cameras supported in V4.40 of this tool.
- Added ["Network Settings" Check] on/off checkbox to [List View]-[Advanced Setting] tab.
- Improved the wall setting on the map, so that the start and end points of a wall can be connected.

### Resolved Issues

- Fixed a minor issue with the [Report]-[Preview] function.  
> Macro (anchor)

# Version 4.41

Release date: November 18, 2024

### Resolved Issues

- Corrected an issue where a camera/other item placed inside a wall or block could not be selected on the imported map.
- Corrected an issue where the change in [Target Model] of [Report Settings] was not saved to the project.
- Corrected an issue where placing a wall/block while a camera is selected resulted in both the camera and the wall/block being selected.  
> Macro (anchor)

# Version 4.40

Release date: October 28, 2024

### New Features / Improvements

- Supports new cameras.  
Indoor PTZ: WV-S61702-Z3, WV-S61602-Z3  
Aero PTZ: WV-X67700-Z3-3, WV-X67700-Z3L3, WV-X67710-Z3-3, WV-X67710-Z3L3, WV-X67300-Z4-3, WV-X67300-Z4L3, WV-X67310-Z4-3, WV-X67310-Z4L3, WV-X67311-Z4L3, WV-X67701-Z3L3, WV-X67711-Z3L3, WV-X67301-Z4L3  
High zoom bullet: WV-X15701-Z3L, WV-X15502-Z1L, WV-X15501-Z3L, WV-X15501-Z1L, WV-X15302-Z1L, WV-X15301-Z1L, WV-S15701-Z3L, WV-S15501-Z3L, WV-S15501-Z1L, WV-S15301-Z1L
- Support memo function. [View detail](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#4.-Support-memo-function-(device/map))
  - A [Map Memo] button has been added to the map
  - A [Memo] field has been added to the Camera/Recorder/Others Properties field.
- Improved the [List View] window by adding a [Summary] tab that shows the number of units by model. [View detail](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#7.-Add-Summary-tab-to-%22List-View%22)
- Support locating recorders and other devices* on the map. [View detail](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#5.-Support-locating-%22Recorder%22-and-%22Other-devices%22-on-the-map)  
*Selectable devices: WJ-PC200, WJ-PR204, WJ-PR201, WV-CU980, Switching hub, PoE hub, Monitor, PC, Others
- Added [Network Settings] to the Account Settings window, the map, and device property fields, to support IP address input. [View detail](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#6.-Add-%E2%80%9CNetwork-Settings%E2%80%9D-screen)
- Support displaying the number of pixels on the simulation image.
- Support masking function to cover and hide unnecessary part of the map.
- Changed the minimum installation height of 360-degree fisheye cameras while using AI app from 2.5m to 2m.  
> Macro (anchor)

# Version 4.33

Release date: August 28, 2024

### Resolved Issues

- Fixed an issue with [Report] function.  
> Macro (anchor)

# Version 4.32

Release date: July 30, 2024

### Resolved Issues

- Fixed an issue with [Report] function.  
> Macro (anchor)

# Version 4.31

Release date: July 23, 2024

### New Features / Improvements

- Improved the [Report] function as follows. [View detail](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#1.-Add-improvements-to-%E2%80%9CReport%E2%80%9D-function)
  - Added Side View, Face, License Plate, People and PPM(F) checkboxes to the [Place of Installation] and [Camera Information] in the [Content] tab, to hide/show them on the report.
  - Added a [Match map size to paper size] checkbox to [Site Plan] in the [Content] tab.
  - Added a [Crop images to export to PPT] checkbox in the [Layout] tab.
  - Added a [Image Quality] tab in [Report Setting] to select the image quality of the report.
  - Added a [Product information(Web)] table that includes links to the product web page on the report.
  - Improved the [Report Setting] to save the latest setting.
- Added [Map service] to the [Import Map] function so that online map service can be used for map. [View detail](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#2.-Add-%E2%80%9CMap-service%E2%80%9D-to-the-%E2%80%9CImport-Map%E2%80%9D-function)
- Improved scrolling performance on the map and menu.

### Resolved Issues

- Fixed minor issues.  
> Macro (anchor)

# Version 4.30

Release date: June 28, 2024

### New Features / Improvements

- Supports new cameras.  
Corner camera: WV-X25580-F2LN2
- Improved the map display and [Display Options] setting as follows. [View details](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#2.-Add-improvements-regarding-camera-icons)  
- Changed camera icons on a map to use camera images.  
- Added [Camera shape size] setting to [Display camera shape] so that the size of camera icons can be selected from Large, Medium or Small.  
- Added [When shrink the map, the camera shape also shrinks] setting to enable resizing camera icons　according to the size of the map.

### Resolved Issues

- Fixed minor issues.  
> Macro (anchor)

# Version 4.20

Release date: March 29, 2024

Notice of changes in recommended browser:   
<span style="color: #ff5630">From this version, Firefox and Safari are removed from the recommended browsers of this tool as below.</span>  
Please use with Google Chrome or Microsoft Edge as a browser.

### New Features / Improvements

- Adjusted the minimum object size of “Bicycle” for [Vehicle Counting].

### Resolved Issues

- Fixed an issue with [Recorder Calculation] to display an error message when unsupported compression (MJPEG) is selected for AI Privacy Guard camera.  
> Macro (anchor)

# Version 4.10

Release date: February 29, 2024 

### New Features / Improvements

- Suppport recorder’s new versions. [View details](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#1.-Support-NX/NU-series-recorder-version-upgrade-(Feb.-2024))  
- Version 1.10 of WJ-NX510K(G), NX410K(G) and NX310K(G).   
- Version 1.30 of WJ-NU301, NU300, NU201 and NU101.  
- Version 5.40 of WJ-NX400, NX300, NX200 and NX100.
- Improved the startup speed of opening a project.
- Added the following message for announcement.  
Displayed message:   
Notice of changes to the End User License Agreement.  
From March 28, 2024, [Firefox] and [Safari] will be removed from the recommended browsers listed in "Operation Environment".

### Resolved Issues

- Fixed minor issues with [Recorder Calculation].  
> Macro (anchor)

# Version 4.01

Release date: February 5, 2024 

### Resolved Issues

- Corrected an issue where [Save project] failed and returned “System Error(500)”.   
<u>Occurrence condition:</u>   
When the map contains an old model such as WV-SCxxx, WV-SWxxx and WV-SF(N)xxx.   
*“xxx” stands for 3-digit model number.  
> Macro (anchor)

# Version 4.00

Release date: December 26, 2023 

### New Features / Improvements

- Supports new cameras.   
- X series dome/bullet: WV-X15700-V2LN, WV-X15600-V2LN, WV-X15500-V3LN​​, WV-X15300-V3LN, WV-X15700-V2L, WV-X15600-V2L, WV-X15500-V3L​, WV-X15300-V3L, WV-X25700-V2LN, WV-X25600-V2LN, WV-X25500-V3LN​, WV-X25300-V3LN, WV-X22700-V2L, WV-X22600-V2L, WV-X22500-V3L​, WV-X22300-V3L  
- Compact dome: WV-X35402-F2LM, WV-X35402-F2L, WV-S35402-F2L, WV-S35402-F2LG, WV-S35402-F2L1, WV-S32402-F2L, WV-S32402-F2LG, WV-S32402-F2L1, WV-U35401-F2L, WV-U35401-F2LG, WV-U35301-F2L, WV-U35301-F2LG, WV-U31401-F2L, WV-U31401-F2LG, WV-U31301-F2L, WV-U31301-F2LG  
> Macro (anchor)

# Version 3.91

Release date: December 1, 2023

### Resolved Issues

- Fixed minor issues.   
> Macro (anchor)

# Version 3.90

Release date: November 17, 2023 

### New Features / Improvements

- Supports [Recorder Calculation] for WJ-NX310K(G), WJ-NX410K(G) and WJ-NX510K(G). [View details](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#1.-Support-NX-series-Recorders)
- Improved [Recorder Calculation] when a camera not supported by the recorder is included in the map.  
You can exclude the unsupported camera by unchecking the [Target] checkbox, to continue the calculation. [View details](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#2.-Improve-%E2%80%9CRecorder-Calculation%E2%80%9D-when-a-camera-not-supported-by-the-recorder-is-included-in-the-map)

### Resolved Issues

- Fixed a minor issue.   
> Macro (anchor)

# Version 3.80

Release date: September 5, 2023

### New Features / Improvements

- Supports new cameras.   
- Rapid PTZ: WV-S66700-Z3, WV-S66700-Z3L, WV-S66600-Z3, WV-S66600-Z3L, WV-S66300-Z3, WV-S66300-Z3L, WV-S66300-Z4, WV-S66300-Z4L, WV-X66700-Z3S, WV-X66700-Z3LS, WV-X66600-Z3S, WV-X66600-Z3LS, WV-X66300-Z3S, WV-X66300-Z3LS, WV-X66300-Z4S, WV-X66300-Z4LS  
- Compact dome: WV-S32302-F2L, WV-S32302-F2LG, WV-S32302-F2L1, WV-S35302-F2L, WV-S35302-F2LG, WV-S35302-F2L1, WV-X35302-F2L, WV-X35302-F2LM
- Improved the [Camera properties] to no longer display an unnecessary message “The Tilt Angle field must be between 36.38 and 90.” when “Far” is set for Multi-directional + PTZ cameras.
- Supports [PoE Budget Calculation] for NU series recorders. [View details](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#3.-Add-PoE-Budget-Calculation-function-for-NU-series-Recorder)  
> Macro (anchor)

# Version 3.70

Release date: June 14, 2023

### New Features / Improvements

- Supports new cameras.   
- WV-U11300-V2 / U21300-V2L   
- WV-S1136A / S1536LA / S1536LA-B / S1536LNA / S1536LNA-B / S1536LNSA / S1536LTA / S1536LTNA / S2136A / S2136A-B / S2136GA / S2136GA-B / S2136LA / S2136LA-B / S2136LGA / S2136LGA-B / S2236LA / S2236LA-B / S2236LGA / S2236LGA-B / S2536LA / S2536LGA / S2536LGNA / S2536LNA / S2536LTA / S2536LTNA / S4156A / S4176A / S4556LA / S4556LMA / S4576LA / S4576LMA / S71300A-F3  
> Macro (anchor)

# Version 3.60

Release date: Marh 31, 2023

### New Features / Improvements

- Supports exporting and importing [Registered projects] data. [View details](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#1.-Add-function-to-export/import-project-data)
- Added [Display numbers for walls and blocks] and [Display lines for walls and blocks] checkboxes in [Display Options]. [View details](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#2.-Add-option-to-show/hide-wall-and-block-numbers-or-lines)
- Supports importing multiple PDF pages as maps on [Import Map].  [View details](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#3.-Support-importing-PDF-containing-multi-page-map-images)  
> Macro (anchor)

# Version 3.50

Release date: February 28, 2023

### New Features / Improvements

- Supports new cameras.   
- WV-X86530-Z2 / WV-X86531-Z2 [View details #1](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#1.-Support-Multi-directional-+-PTZ-camera)  
- WV-S85402-V2L / WV-S85702-F3L / WV-U85402-V2L [View details #2](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#2.-Support-Multi-directional-camera-(2-sensors))
- Changed the order of cameras listed on the [Camera Properties]-> [Camera Select].
- Supports “Perpendicular Angle Mode” for [People Counting] of multi-directional cameras.  [View details #5](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#5.-Support-%22Perpendicular-Angle-Mode%22-of-People-Counting-for-Multi-directional-camera)
- Supports new recorders: WJ-NU101, NU201, NU300 and NU301.  [View details #4](https://versionup.refined.site/space/CVI/982286428/System+Design+Tool+(SDT)#4.-Support-NU-series-Recorders)
- Supports version 5.20 of WJ-NX100, NX200, NX300 and NX400.   
- [Recorder Calculation] newly supports the following cameras: WV-S61300, S61501, S65300, S65301, S65302 and S65501
- Added the following message that appears when 360-degree fisheye camera is placed on a map.   
Displayed message: PPM figures and simulation images are reference values.  Accurate simulation may not be possible depending on the characteristics of the lens.
- Changed the upper limit of frame rate while using AI Privacy Guard in WV-S71300-F3 from 10fps to 15fps.   
> Macro (anchor)

# Version 3.42

Release date: November 18, 2022

### Resolved Issues

- Fixed minor issues.   
> Macro (anchor)

# Version 3.41

Release date: October 31, 2022

### Resolved Issues

- Fixed minor issues in export report function.   
> Macro (anchor)

# Version 3.40

Release date: October 28, 2022

### New Features / Improvements

- Supports [Report] feature to export report in PDF/PPT format.
- Supports displaying camera name on a map.
- Improved the field of view accuracy of [People Counting].